A1 KİMYA YALITIM İNŞ. TAAH. SAN. VE TİC. LTD. ŞTİ.

Waterproofing

HYDRO GEL 54 Injection Water proof Chemical

Consantre, Concrete crack water insulation Injection Chemical with a very low viscosity Elastic polyacrylic gel for permanent waterproofing work. HYDROGEL-54 is a low viscosity high reactive Injection system with adjustable reaction time.Made of a special acrylic composition based on a owned recipe.. The gel is chemically extremely resistant and tough against micro organism attacks INTENDED USE: *This formulation can only be used in a moist or wet environment. *HYDRO GEL 54 is fermulated for jointing very fine cracks * It is particularly suitable for applications involving mass injection. *HDYRO GEL 54 high filling material consumption, for filling gaps or for grouting joints and reinforcing injections behind embedded structures

*For concrete fissures, *For cold grouting, *For segregations, *For dilatations *For segment joints *For high pressure water floods ADVANTAGES:

*Being resistant to alkalies and acids, it provides protection against corrosion. *It causes no harm to health and environment. *Since it has the same viscosity with water, it penetrates into all microfissures. *Since its reaction duration can be fixed, its application is completed in the most efficient form.

Waterproofing

HYDRO SWELL 54 waterproofing Chemical foundation wall concrete.

HYDRO SWELL 54 is an innovative, flexible, non-breaking, waterproofing solution for waterproofing Chemical foundation wall concrete. swells when in contact with water

ADVANTAGES

* Easy and Practical to use * Touches every point of the applied surface, does not leave a gap * Does not require any attachment, welding parts and process, provides a monolithic whole waterproofing, does not break thanks to its flexibility * Flexible, swells up to 1200% in contact with water. It returns to its former state in dry environment * Volume change does not disrupt the molecular structure, does not damage the concrete, does not require welding at the joints, can be applied on horizontal and vertical surfaces, non-toxic, not affected by freezing and thawing, does not oxidise, does not corrode. * Adhesion strength is high * Easy to work and use, fast application

Waterproofing

HYDRO FILLER 54 Filling and waterproofing the connection tie rod holes formed

HYDRO FILLER

Filling and waterproofing the connection tie rod holes formed by the mould connection bars ADVANTAGES

*Easy to apply ready to use *Cost effective, no special priming or preparation required *Perfect Gel consistency to effectively fill tie rod holes *Expansion system provides dimensional stability by balancing shrinkage *High bond strength completely fills the hole and provides waterproofing *Resistant to water, frost, dry and salt penetration *Ideal for use under cold humid conditions. *High tensile and impact resistance

Waterproofing

IZOFORT 100 Spreadab Waterproofing Chemical

Polyurethane based two component, spreadable waterproofing chemical ,solvent free self leveling (self-leveling) multi-layer or thin layer is water proof chemicals for wet areas

ADVANTAGES

*Resistant to alkalis and acids and protects against corrosion. *It does not contain fungi and bacteria. *There is no harm to health and environment. *It is UV resistant. *Not affected by extreme heat and cold (-50 ° C + 150 ° C) *Impact resistant *It has the feature of closing gaps and cracks. *Long life. *It does not contain algae and is antimicrobial. *Due to its high adherence property, it is not separated from the application. *Creates a floor that does not require grouting. *It is hygienic and easy to clean. It can be cleaned with cleaners containing detergent and solvent. *Creates a semi-gloss surface. *Resistant to abrasion and slip.

Adhesives / Tapes

A-K 54 Upholstery Foam Adhesive

DESCRIPTION

Upholstery Sponge adhesive, in the furniture industry, applied with a gun, non-flammable. It provides bonding of upholstery materials to each other, to wood, chipboard or other similar products. It is a sponge adhesive with high adhesion strength thanks to its special formula Colour: Transparent honey colour / Red Viscosity: 290 +/- 25 mPas (25ºC) Open time: 20 s-15 minutes (varies depending on ambient temperature)

Packaging: 15kg Storage: It can be stored in its unopened original packaging at 20ºC for 1 year.

AREAS OF USAGE Furniture, bed, sofa and textile industry. Used for bonding fabric, leather, sponge and felt.

Adhesives / Tapes

A-K 54 S Aerosol Upholstery Foam Adhesive

Aerosol Upholstery foam Adhesive